Connect using the USB receiver
To connect your Spotlight device using the USB receiver:

1. Remove the receiver from within the R500 remote by gently pulling on it.    

   

2. Plug the receiver into a USB port on your device. 

Your device should automatically detect the R500 laser presentation remote and start working.

Connect using Bluetooth
To connect your Spotlight remote using a Bluetooth connection:

1. Hold and press the Laser button (top) and the Back button (bottom) on your R500 remote, as shown for 3 seconds.

   

   
   The LED should start blinking rapidly and R500 should be available for pairing to Bluetooth for three minutes.
   NOTE: Pressing any other button within 20 seconds of initiating Bluetooth pairing will turn pairing mode off. 
2. Complete the pairing process on your device. For more information, see Connect your Logitech Bluetooth device.

TIP: To get the most out of your device, download and install the Logitech Presentation software.