Items Needed | Simplified Wiring Diagrams | Connecting Mic Pods | Detailed Wiring Diagrams

Sight Guide > 1. Hardware & Installation > 1.4 Wiring Diagrams

Items Needed

1. Host Dongle: included.
2. CAT6 cable: user supplied.
   • Aside from what’s included in the Sight package, users will need to provide a POE+ source (either via a network port or POE+ injector) and CAT6 or above cabling.  The Sight Dongle, included in the package, is needed for installation.
3. Power over ethernet source: user supplied.
   • POE+ 802.3at Type 2
4. Mic Pod Dongle: included (needed if used with Logi Rally Mic Pods).
5. Mounting parts: included.
6. In configurations where a Mic Pod Hub is connected to Sight, a user supplied CAT6 female to female adapter is needed.

Note: Sight requires both a connection to Rally Bar or Rally Bar Mini and to a POE+ power source. There are two ways to provide POE+ power to Sight: the first is to connect Sight to a POE+ enabled network port. Not all network ports are configured to supply POE+ power. If unsure, contact your network administrator.

On the bottom of Logitech Sight there are three RJ45 jacks for connecting to the 

• POE+ power
• Host camera system via the Sight Dongle
• To Rally Mic Pods via the Mic Pod Dongle.

A connects to POE+ 802.3at Type 2.

B connects to the Mic Pod Dongle (if used with Rally Mic Pods).

C connects to the Sight Dongle.

Simplified wiring diagrams

Rally Bar/Rally Bar Mini | Rally Bar/Rally Bar Mini and Rally Mic Pods | Rally Bar/Rally Bar Mini and Rally Mic Pods and Mic Pod Hubs | Rally/Rally Plus with computer at the Display Hub | Rally/Rally Plus with computer at the Table Hub | Rally/Rally Plus and Rally Mic Pods and Mic Pod Hubs

Basic wiring with Rally Bar/Rally Bar Mini

Basic wiring with Rally Bar/Rally Bar Mini and Rally Mic Pods

Basic wiring with Rally Bar/Rally Bar Mini and Rally Mic Pods and Mic Pod Hubs

Note: See here for the maximum number of Mic Pods and Hubs.

Basic wiring with Rally/Rally Plus with computer at the Display Hub

Note: Using Sight with Rally or Rally Plus will be supported at a future date.

Basic wiring with Rally/Rally Plus with computer at the Table Hub

Note: Using Sight with Rally or Rally Plus will be supported at a future date.

Basic wiring with Rally/Rally Plus and Rally Mic Pods and Mic Pod Hubs

Note: Using Sight with Rally or Rally Plus will be supported at a future date.

Note: See here for the maximum number of Mic Pods and Hubs.

Connecting Mic Pods

1. Plug the Mic Pod cable into the Mic Pod Dongle.
2. Swing the cable retention clip over the Mic Pod plug.
3. Insert the Mic Pod Dongle into the appropriate RJ45 jack on the bottom of Sight.

Detailed Wiring diagrams

Rally Bar/Rally Bar Mini | Rally Bar/Rally Bar Mini and Rally Mic Pods | Rally Bar/Rally Bar Mini and Rally Mic Pods and Mic Pod Hubs | Rally/Rally Plus with computer at the Display Hub | Rally/Rally Plus with computer at the Table Hub | Rally/Rally Plus and Rally Mic Pods and Mic Pod Hubs

Detailed wiring with Rally Bar/Rally Bar Mini 

Detailed wiring with Rally Bar/Rally Bar Mini and Rally Mic Pods

Detailed wiring with Rally Bar/Rally Bar Mini and Rally Mic Pods and Mic Pod Hubs

Detailed wiring with Rally/Rally Plus with computer at the Display Hub

Detailed wiring with Rally/Rally Plus with computer at the Table Hub

Detailed wiring with Rally/Rally Plus and Rally Mic Pods and Mic Pod Hubs

Back to Top | Next Article: 2.1 Configuring Sight